| Output Power |
2211W max @ 1 input active, 4422W max @ 2 inputs active and 4433W max at 3 inputs active. |
| Output Voltage |
Both outputs are electrically isolated. |
| Line regulation |
+/-3% for 12V, ±0.1V for 3.3VSB |
| Load regulation |
+/-3% for 12V, ±0.1V for 3.3VSB(3.5V MAX @no load) |
| Ripple & Noise |
< 120mV pk-pk (12V), <50Mv pk-pk(3.3VSB) |
| Rise time |
5~ 300 ms |
| Turn On Delay |
< 2.5 sec |
| Dynamic response |
11.2V min<12V<12.6 Max, 3.135V<3.3VSB<3.465V |
| Over current protection |
115-130% of Full load(12V), 105%-120% of Full load(3.3VSB) |
| Short circuit protection |
delay<80ms, Latching Type |
| Over voltage protection |
Latching Type |
| Current share |
Current sharing via share bus |
| EEPROM & I2C bus |
PS with a serial EEPROM communicates information to the system processor through I2C bus |
| Microcontroller |
PSU remote shut off, LED status monitored and controlled through microcontroller. |
| Thermal protection |
PWM Converter disabled when the internal temperature exceeds safe operating range |
| Under voltage |
Capable to withstand any input under voltage for unlimited time without damage. |
| Power Fail signal |
A Low True Open collector signal to indicate encounter some failure. Capable of driving <0.4v with a load of 4mA. |
| Power Supply Present |
A Low True Open collector signal to sense the number of power supplies in the system (operational or not) |
| Hot swapping |
Hot swappable |
